Printers
New printer launches, hands-on reviews, and hardware comparisons — from a first machine to a wall of them.
-
Printers
Best 3D Printers for Engineering Filaments in 2026
Printing PEEK, polycarbonate, and high-performance nylon requires hotends above 300°C, beds above 100°C, and heated enclosures. Here are the best printers that actually meet those requirements in 2026.
-
Printers
SLA vs MSLA vs DLP: Resin Printer Types Explained
Resin printers use three distinct light-curing technologies — laser SLA, monochrome LCD MSLA, and DLP projector — each with different resolution profiles, print speeds, and cost structures. Here's how to choose.
-
Printers
QIDI Q1 Pro Review: Heated Chamber Performance at a Competitive Price
The QIDI Q1 Pro brings a 60°C active heated chamber, 600mm/s speed, and Klipper firmware to the enclosed printer segment at a price that undercuts the Bambu P1S. Here's the full breakdown.
-
Printers
FlashForge Adventurer 5M Pro Review: Fast, Enclosed, and Genuinely Capable
The Adventurer 5M Pro hits 600mm/s in a fully enclosed CoreXY chassis with automatic levelling and a quick-swap nozzle system. Here's how it performs against the Bambu A1 and who should buy it.
-
Printers
Prusa MK4S Review: The Benchmark Workhorse in 2026
The Prusa MK4S adds a refined Nextruder, Input Shaper resonance compensation, and improved auto bed levelling to the MK4 platform. We break down whether it justifies the price against faster competitors.
-
Printers
Bambu Lab's H2D Arrives: Dual Extruders, Large Format, and a New Price Point
The H2D brings dual independent toolheads to the Bambu ecosystem — 350×320mm bed, 300°C hotends, and a $1,199 launch price that targets serious makers and small studios.
-
Printers
Creality K2 Plus Review: Is the Budget Multicolor CoreXY Any Good?
The Creality K2 Plus pairs a 350mm CoreXY chassis with the CFS multicolor system and a $699 launch price. We look at whether it's a real Bambu challenger or just a spec sheet.
-
Printers
Anycubic Goes All-In on Color: The Kobra S1 Line Scales to 16 Hues
Anycubic's 2026 Kobra lineup pushes budget multicolor to an extreme — up to 16 colors via stackable ACE 2 Pro units, a $459 early-bird ACE 2 Pro Combo, a 350mm Max, and a $299 four-color Kobra X. Here's the lineup and what it signals.
-
Printers
Creality's KliTek Toolchanger Wants to Make Multicolor and Mixed Nozzles Routine
Creality's upcoming K3 flagship uses a new lightweight nozzle-changing system called KliTek that enables print-in-place multicolor, stable 80A TPU, and mixing nozzle sizes mid-print — claiming TPU flow rates seven times those of typical consumer machines.
-
Printers
Prusa's Core One L Scales Up the CoreXY Without Scaling Up the Footprint
Prusa's new Core One L doubles the print volume of the Core One while growing its footprint by just 10%. With an actively heated chamber, a cast-aluminum convection bed, and a roughly $1,819 price, it's aimed squarely at serious makers and pros.
-
Printers
The Race to Cheap Multicolor: How Sub-$600 Printers Are Closing in on the AMS
Multicolor printing used to mean a premium AMS or a tool changer. Now a wave of affordable CoreXY machines — Elegoo's Centauri Carbon line, Bambu's A2L, and low-purge newcomers — is bringing it within reach. Here's where the budget multicolor race stands.
-
Printers
The Best Budget Resin Printers for Detail and Miniatures
For tabletop minis, jewelry, and fine detail, resin beats filament every time. These are the budget MSLA printers worth buying in 2026 — and what the spec sheet numbers actually mean.
