All articles
-
Materials
Glow-in-the-Dark Filament: Settings, Nozzle Wear, and Best Results
Glow-in-the-dark filaments use strontium aluminate phosphors for bright, long-lasting afterglow — but those same particles eat brass nozzles. Here's the full guide to printing luminescent parts correctly.
-
Materials
Conductive Filament: 3D Printing Circuits and Electronics
Conductive PLA and graphene-doped filaments let you print basic circuits, sensors, and wearable electrodes directly into parts. Here's what the resistivity numbers mean and where conductive filament genuinely works.
-
Materials
HIPS Filament: The Best Soluble Support for ABS Printing
HIPS dissolves in limonene, bonds perfectly with ABS, and outlasts PVA in high-temperature dual-extrusion setups. This guide covers the full workflow for using HIPS as a support material alongside ABS.
-
Materials
PLA+ vs Standard PLA: What the 'Plus' Actually Buys You
PLA+ costs more and promises stronger, tougher prints — but the claims vary wildly by brand. This breakdown tells you what actually changes in the chemistry, where the gains are real, and when standard PLA is the smarter buy.
-
Materials
Polycarbonate Filament: High-Heat Printing Done Right
Polycarbonate is the toughest common desktop filament — with heat resistance above 110°C and optical clarity for light applications. Here's what it takes to print PC successfully and where it's worth the effort.
-
Materials
PETG Filament: The Complete Printing Guide
PETG sits between PLA and ABS in the filament hierarchy — combining good strength with easy printing. This guide covers print settings, moisture sensitivity, brand picks, and when PETG beats its rivals.
-
Printers
Bambu Lab's H2D Arrives: Dual Extruders, Large Format, and a New Price Point
The H2D brings dual independent toolheads to the Bambu ecosystem — 350×320mm bed, 300°C hotends, and a $1,199 launch price that targets serious makers and small studios.
-
Printers
Creality K2 Plus Review: Is the Budget Multicolor CoreXY Any Good?
The Creality K2 Plus pairs a 350mm CoreXY chassis with the CFS multicolor system and a $699 launch price. We look at whether it's a real Bambu challenger or just a spec sheet.
-
Materials
PLA-CF, PETG-CF, PA-CF: Which Carbon Fiber Filament Is Right for You?
Carbon fiber filament has moved from niche to mainstream, with options now in every base polymer. Here's how to choose between PLA-CF, PETG-CF, and nylon CF — and what you're actually getting for the price.
-
Materials
PEEK and Ultem Are Finally Printable on Prosumer Machines — Here's What That Means
High-temperature engineering polymers like PEEK and PEI (Ultem) used to require $50,000 industrial printers. A new wave of hardware and affordable filament is changing that equation.
-
Software
Printables vs. MakerWorld vs. Cults3D: Where Should You Share (and Find) Models in 2026?
The model-sharing landscape has fragmented since Thingiverse's decline. We compare the three serious contenders — Printables, MakerWorld, and Cults3D — on community size, creator economics, and search quality.
-
Business
Can You Actually Make Money with a 3D Printer in 2026? A Realistic Guide
The side-hustle promise of desktop 3D printing is real but often misunderstood. Here's an honest look at what sells, what margins actually look like, and which business models work.
Page 29 of 32
