Bambu Lab
Every FilamentFeed story on Bambu Lab — news, reviews, and analysis, newest first.
-
Materials
TPU vs TPE vs TPC: Choosing the Right Flexible Filament for the Job
Flexible filaments are not interchangeable. TPU, TPE, and TPC differ substantially in hardness, chemical resistance, print temperature, and long-term fatigue behavior. Choosing the wrong one means a part that either fails in service or was never printable in the first place.
-
Software
3MF: Why the 3D Printing Industry Is Moving Away From STL
STL has been the default 3D printing format for 35 years. The 3MF format does everything STL does and adds color, material, orientation, and multi-part support — here's why the transition is accelerating.
-
Software
Bambu Studio Support Painting: Precise Manual Control Over Auto-Generated Supports
Bambu Studio's support painting tool lets you block auto-generated supports, add manual supports to specific faces, and enforce tree vs normal support type per region. Here's how to use it effectively.
-
Software
AI Tools for 3D Printing in 2026: What's Actually Useful and What's Still Hype
AI-generated geometry, AI-optimized support structures, and AI print monitoring are all real now. The question is which tools deliver enough value to integrate into a real workflow.
-
Materials
High-Flow Filaments: What They Are and Why Your Speed Printer Needs Them
At 300+ mm/s, standard PLA becomes the bottleneck — not the motion system. High-flow filaments are formulated to melt faster, enabling speed printers to reach their actual potential.
-
Printers
Bambu Lab P1P vs P1S: Is the Enclosed Chamber Worth the Price Premium?
The P1P and P1S share the same CoreXY motion system and print quality. The difference is the enclosure, chamber heater, and camera. Here's when each choice makes sense.
-
Printers
AnkerMake M5C Review: Speed-Focused CoreXY That Trades Features for Simplicity
The M5C drops the camera, AI detection, and touchscreen of the M5 to hit a lower price point. What remains is a capable speed-oriented FDM printer with a learning-curve slicer.
-
Printers
Creality Ender 3 V3: The Budget Staple Gets a CoreXY Upgrade
The Ender 3 V3 replaces the classic bed-slinger architecture with CoreXY, adds input shaping, and targets 600 mm/s — all while maintaining the price point that made Ender 3 synonymous with budget FDM.
-
Guides
Variable Layer Height: How Adaptive Slicing Gets Better Surface Quality Without the Time Penalty
Adaptive or variable layer height lets slicers use thin layers where they matter and thick layers where they don't. The result is better surface quality at nearly the same print time.
-
Materials
Glass Fiber vs Carbon Fiber Filament: Which Reinforcement Is Right for Your Application?
Both add stiffness and reduce weight compared to base filaments. But GF and CF have different mechanical profiles, abrasion demands, and cost structures that make them suited to different tasks.
-
Guides
Designing and Printing Watertight Parts: Vases, Containers, and Plumbing Fittings
FDM prints aren't watertight by default. Layer gaps, infill voids, and perimeter seams all leak. Here's how to close them — in the slicer, the design, and post-processing.
-
Guides
First-Time 3D Printer Setup: From Unboxing to First Successful Print
New printer, blank slate. The gap between unboxing and a clean first print is narrower than it used to be — but getting there still requires understanding a few non-obvious steps.
