Guides
Evergreen how-tos and buyer's guides, written in plain English with the trade-offs that actually matter.
-
Guides
How to Fix Warping in 3D Prints: Adhesion, Brims, and Enclosures
Warping lifts print corners off the bed, ruining parts and wasting filament. This guide covers every fix: first-layer adhesion, bed surfaces, brims vs rafts, ambient temperature management, and material-specific strategies for ABS and ASA.
-
Guides
Temperature Calibration Tower Guide: Finding Your Filament's Sweet Spot
Temperature towers reveal the ideal print temperature for any filament in a single test print. This guide covers how to slice and print one, how to read the results, and how to connect temp findings to pressure advance calibration.
-
Guides
How to Fix Layer Shifting in 3D Prints
Layer shifting ruins prints by displacing layers mid-job. This guide covers every cause — belt tension, stepper current, print speed — and walks through systematic diagnosis and fixes to get your printer running true again.
-
Guides
Infill Patterns and Density: The Complete Guide to Stronger Prints
Gyroid, grid, honeycomb, lightning — every infill pattern makes different tradeoffs between strength, speed, material use, and surface quality. Here's exactly when to use each and how density changes the outcome.
-
Guides
Designing for FDM Tolerances: Clearance, Interference Fits, and Hole Compensation
FDM prints shrink, expand, and deviate from nominal dimensions in predictable ways. This guide covers clearance vs interference fits, hole compensation, snap fits, and how to test your specific printer.
-
Guides
Bambu AMS Complete Guide: Loading, Purge Towers, Color Management, and Failure Recovery
The Bambu Automatic Material System enables multi-color and multi-material printing with minimal setup. This guide covers loading filament, managing purge towers, handling AMS failures, and AMS vs AMS Lite.
-
Guides
3DBenchy Explained: What Every Feature Tests and How to Read Your Results
The 3DBenchy is the most recognized 3D print test model in the world — but most makers only vaguely know what it measures. This guide explains every feature, common failure patterns, and what to adjust.
-
Guides
Best 3D Printer Upgrades for the Money: Hotends, Extruders, Probes, and More
Not every upgrade improves every printer. This guide covers the hotend, extruder, bed leveling, enclosure, and frame upgrades that deliver the best return on investment for common FDM machines in 2026.
-
Guides
How to Calibrate Flow Rate and Extrusion Multiplier: Ellis Method, Cube Tests, and Orca Tools
Incorrect flow rate is one of the most common sources of print quality problems. This guide covers the cube test, Ellis extrusion calibration method, and Orca Slicer built-in tools step by step.
-
Guides
How to Dry Filament: Temperatures, Dryers, Ovens, and Long-Term Storage
Wet filament causes bubbling, stringing, and weak layer bonds. This guide covers drying temperatures for every common material, filament dryers vs kitchen ovens, and proper storage to prevent moisture uptake.
-
Guides
Sanding, Priming, and Painting 3D Prints: A Complete Post-Processing Guide
Layer lines, surface texture, and rough support scars are normal on FDM prints — but they do not have to be permanent. This guide covers sanding grits, filler primer, XTC-3D, and spray versus brush painting.
-
Guides
Support Structures Guide: Tree, Normal, and Organic Supports Explained
Support structures make complex prints possible but add time, material waste, and removal effort. This guide covers normal vs tree vs organic supports, interface layers, and the slicer settings that minimize pain.
